Landmark is a complete standalone telemetry system housed in IP65 rated enclosures - allowing a truly 'plug in and go' approach. The simplest system will consist of a Transmitter and a Receiver.
	As standard, the Landmark Transmitter is configured as follows: - 1 analogue input - such as a 4-20mA signal from a flowmeter - 8 volt free digital inputs - for example to accept running/stopped outputs from pumps - 2 pulse signals - to accept outputs from an electricity meter or a shaft encoder for instance. - 1/2 watt radio allowing transmission distances of up to 10km without the need for any form of radio licence.
	The Landmark Receiver will output all data received from the Transmitter exactly as fed in : - 1 analogue output - which can be fed directly onto a meter or recorder. - 8 Digital relay outputs - rated at 2A to drive lamps or indicators. - 2 Pulse outputs - which can be fed directly into meters or totalisers. - Serial RS232 output - this can be fed into a PC or PLC and using one of our bespoke SCADA software packages a full centralised system can be implemeted.
	Landmark Repeaters re-transmit all received data - extending the transmission range or to contend with difficult terrain or obstacles.
	All Landmark units are fitted with 240/110V power supplies, however ultra-low power consumption allows use with batteries and/or Solar Panels.